7DCEA01UNA Lenovo ST250 V3 Tower, 1x Xeon E-2488 8C, 16GB DDR5, 4x 3.5in bays, RAID 5350-8i, 800W
Preconfigured ST250 V3 tower server (7DCEA01UNA) with one Xeon E-2488 8-core CPU, 16 GB DDR5, 4x 3.5-inch bays (no drives), RAID 5350-8i and 800 W power.
Also known as · Lenovo ThinkSystem ST250 V3 · ST250 V3 · ST250 V3 E-2488 · ThinkSystem 7DCE · 7DCE ST250 V3 · ST250 V3 4x 3.5 bays · Lenovo ST250 V3 preconfigured · ST250 V3 small business server
1-YR ZAYNTEK WARRANTY
Overview
The Lenovo ThinkSystem ST250 V3 is a compact single-socket tower server for small offices. It supports Intel Xeon E-2400 and Xeon 6300 processors, up to 128 GB of DDR5 ECC memory and four PCIe slots.
Model 7DCEA01UNA pairs one Xeon E-2488 (8 cores, 3.2 GHz, 95 W) with 16 GB of DDR5 on a single module. Its four 3.5-inch hot-swap bays are empty and run from RAID 5350-8i. Power comes from a single 800 W hot-swap Platinum power supply, with XClarity Controller 2 Standard for remote management.
Specifications
This Configuration
| Model (MTM) | 7DCEA01UNA |
|---|---|
| Form factor | Tower |
| Processor | 1x Intel Xeon E-2488 8C 3.2 GHz 95 W (Intel Xeon E-2400) |
| Memory installed | 1x 16GB DDR5 ECC UDIMM |
| Storage controller | ThinkSystem RAID 5350-8i 12Gb SAS/SATA adapter |
| Drive bays | 4x 3.5-inch hot-swap bays |
| Drives included | None (all bays open) |
| Networking | 2x onboard 1GbE RJ-45 (Broadcom BCM5720); dedicated 1GbE XCC2 management port |
| PCIe slots | 4 full-height PCIe slots on the system board (1x PCIe 5.0 x16, 3x PCIe 4.0 x4) |
| Power supply | 1x 800 W hot-swap Platinum |
| Fans | Fixed system fans (count depends on drive bay layout) |
| Management | XClarity Controller 2 Standard |
Processor Platform
| Supported processors | One Intel Xeon E-2400, Xeon 6300 or Pentium G7400-series processor (up to 8 cores) |
|---|---|
| Sockets | 1 |
Memory
| Memory slots | 4 DDR5 ECC UDIMM slots, two channels, memory runs at 4400 MHz |
|---|---|
| Maximum memory | 128 GB with 4x 32 GB UDIMMs |
Storage
| Platform drive bays | Up to 16x 2.5-inch or 8x 3.5-inch hot-swap bays, plus two M.2 drives on a PCIe adapter |
|---|
Expansion & Networking
| Expansion | 4 full-height PCIe slots: one PCIe 5.0 x16 and three PCIe 4.0 x4 |
|---|
Power & Management
| Power supply options | One fixed 300 W Gold or 500 W Platinum supply, or up to two hot-swap 800 W redundant supplies |
|---|---|
| Systems management | XClarity Controller 2 with dedicated 1GbE port |
Physical
| Dimensions | 176 x 444 x 578 mm (6.9 x 17.5 x 22.8 in), W x H x D |
|---|---|
| Weight | Up to 23.95 kg (52 lb) fully configured |
Before you order
| Optical drive | Not included (bay open) |
|---|
| Category | Servers |
|---|---|
| Form factor | Tower |
| Warranty | 1-year ZaynTek |
§ 04Questions
Does the 7DCEA01UNA come with drives?
No. The 4x 3.5-inch hot-swap bays are open, so you can add the hard drives or SSDs your workload needs.
How much memory can the ST250 V3 take?
This model ships with 16 GB. The platform has 4 DDR5 ECC UDIMM slots and reaches 128 GB with 4x 32 GB UDIMMs.
Is the 7DCEA01UNA a single or dual power supply model?
It ships with a single 800 W hot-swap Platinum power supply. The platform accepts a second hot-swap supply for redundancy.
§ 05Related — Servers
View all7DCEA01XNA
7DCEA01YNA
7DCEA020NA
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.
