7DCEA01XNA Lenovo ST250 V3 Tower, 1x Xeon E-2456 6C, 16GB DDR5, 4x 3.5in bays, onboard SATA RAID, 800W
Preconfigured ST250 V3 tower server (7DCEA01XNA) with one Xeon E-2456 6-core CPU, 16 GB DDR5, 4x 3.5-inch bays (no drives), onboard SATA RAID and 800 W power.
Also known as · Lenovo ThinkSystem ST250 V3 · ST250 V3 · ST250 V3 E-2456 · ThinkSystem 7DCE · 7DCE ST250 V3 · ST250 V3 4x 3.5 bays · Lenovo ST250 V3 preconfigured · ST250 V3 small business server
1-YR ZAYNTEK WARRANTY
Overview
The Lenovo ThinkSystem ST250 V3 is a compact single-socket tower server for small offices. It supports Intel Xeon E-2400 and Xeon 6300 processors, up to 128 GB of DDR5 ECC memory and four PCIe slots.
Model 7DCEA01XNA pairs one Xeon E-2456 (6 cores, 3.3 GHz, 80 W) with 16 GB of DDR5 on a single module. Its four 3.5-inch hot-swap bays are empty and run from onboard SATA RAID. Power comes from a single 800 W hot-swap Platinum power supply, with XClarity Controller 2 Standard for remote management.
Specifications
This Configuration
| Model (MTM) | 7DCEA01XNA |
|---|---|
| Form factor | Tower |
| Processor | 1x Intel Xeon E-2456 6C 3.3 GHz 80 W (Intel Xeon E-2400) |
| Memory installed | 1x 16GB DDR5 ECC UDIMM |
| Storage controller | Onboard SATA with Intel VROC software RAID; no RAID adapter |
| Drive bays | 4x 3.5-inch hot-swap bays |
| Drives included | None (all bays open) |
| Networking | 2x onboard 1GbE RJ-45 (Broadcom BCM5720); dedicated 1GbE XCC2 management port |
| PCIe slots | 4 full-height PCIe slots on the system board (1x PCIe 5.0 x16, 3x PCIe 4.0 x4) |
| Power supply | 1x 800 W hot-swap Platinum |
| Fans | Fixed system fans (count depends on drive bay layout) |
| Management | XClarity Controller 2 Standard |
Processor Platform
| Supported processors | One Intel Xeon E-2400, Xeon 6300 or Pentium G7400-series processor (up to 8 cores) |
|---|---|
| Sockets | 1 |
Memory
| Memory slots | 4 DDR5 ECC UDIMM slots, two channels, memory runs at 4400 MHz |
|---|---|
| Maximum memory | 128 GB with 4x 32 GB UDIMMs |
Storage
| Platform drive bays | Up to 16x 2.5-inch or 8x 3.5-inch hot-swap bays, plus two M.2 drives on a PCIe adapter |
|---|
Expansion & Networking
| Expansion | 4 full-height PCIe slots: one PCIe 5.0 x16 and three PCIe 4.0 x4 |
|---|
Power & Management
| Power supply options | One fixed 300 W Gold or 500 W Platinum supply, or up to two hot-swap 800 W redundant supplies |
|---|---|
| Systems management | XClarity Controller 2 with dedicated 1GbE port |
Physical
| Dimensions | 176 x 444 x 578 mm (6.9 x 17.5 x 22.8 in), W x H x D |
|---|---|
| Weight | Up to 23.95 kg (52 lb) fully configured |
Before you order
| Optical drive | Not included (bay open) |
|---|---|
| Drive limit | Up to 6 drives when an internal optical drive is installed |
| Category | Servers |
|---|---|
| Form factor | Tower |
| Warranty | 1-year ZaynTek |
§ 04Questions
Does the 7DCEA01XNA come with drives?
No. The 4x 3.5-inch hot-swap bays are open, so you can add the hard drives or SSDs your workload needs (SAS drives need a SAS RAID adapter or HBA, since this model uses onboard SATA).
How much memory can the ST250 V3 take?
This model ships with 16 GB. The platform has 4 DDR5 ECC UDIMM slots and reaches 128 GB with 4x 32 GB UDIMMs.
Is the 7DCEA01XNA a single or dual power supply model?
It ships with a single 800 W hot-swap Platinum power supply. The platform accepts a second hot-swap supply for redundancy.
§ 05Related — Servers
View all7DCEA020NA
7DCEA01RNA
7DCEA01UNA
NOTE · Condition is shown on each listing where an offer states it; ask for it on any quote. Units marked REFURBISHED are fully tested and carry a 1-year ZaynTek warranty.
